Woodwork
Hand Tools
- Sharp Edges.
- Loose parts.
- Blunt / worn parts.
- Correctly stored
- Protective equipment to be worn.
Band Saw
- Set up correctly with right blade for the job.
- Not making metal rubbing noises.
- Safety guards in place.
- Correct tension.
- Band Saw set up.
Wood Lathe
- All chisels in good working order and suitably stored.
- Chucks, tailstock and rotating equipment in good condition and suitably stored.
- Facemask to be worn.
- Drive belts in good condition
- Suitable speed set.
- Tool rest correctly adjusted.
Planer Thicknesser and Bench Router
- Blades on good condition.
- Set at correct depth for usage.
- Safety guards in place.
- Ear muffs used.
- Planer set up
- Router Table use
Drill Press (Wood Work)
- When changing or removing bits from the chuck ALWAYS check that the chuck key has been removed before switching on.
- Make sure items being drill are held securely. If necessary use a drill vice or clamps.
- ALWAYS wear protective eyewear.
Bench Grinder
- Wheels not damaged.
- Vibration free.
- Guard in place.
- Tool rest correctly adjusted.
- Goggles must be worn.
- Endeavour to wear the wheel evenly across.
Bench Saw
- Clean surrounds.
- No obstructions to safe use.
- Safety guards in place.
- Ear Muffs used.
- Bench Saw set up pt1
- Bench Saw set up pt2
Electric Tools
- Checked and suitable for use.
- Free of damage.
- Suitably stored
- Moisture checked.
- Switch off and unplug when not in use.
- Protective equipment to be used.
Mitre Saw
- Muffs on.
- Dust extractor working.
- Timber well held and supported.
- Don't cross your hands.
- Wait for saw to stop before clearing.
Metalwork
Metal lathes
- Cutting tools suitable and in good condition.
- Chuck and tailstock in good condition.
- Speed and feed checked.
- Job suitably secured.
Drill Press - (Metal Work)
- When changing or removing bits from the chuck ALWAYS check that the chuck key has been removed before switching on.
- Make sure items being drilled are securely held in a drill vice.
- ALWAYS wear protective eyewear.
Welding
- Use protective clothing and eyewear at all times.
- Use an isolating curtain to protect others.
- Be aware of where your sparks are going.
- Be aware of other Sheddies around you.
General
Grinding, Cutting and Wire Brushing
- Use protective eyewear and ear protection at all times.
- Be aware of where your sparks are going.
- Be aware of other sheddies around you.
Painting
- Wash brushes after use.
- Put down drop cloths or protective coverings.
- Be mindful of where the paint is going.
Compressor
- Check the oil level in the crank case.
- Make sure the pressure level is set at the regulator to suit your job.
- Drain Pressure tank after use.
Contact us
We are open Tuesdays and Thursdays 9am - 3pm
From 1st March 2025 will also be open Saturday 9am-3pm
Phone: Mobile 027 4854 335 (Vern)
Email:
contact@morrinsvillemenzshed.nz
Our location
1A Canada Street, Morrinsville
